How to Record Your Screen with Audio?

Recording a screen with sound comes down to one decision made before the capture starts: which audio the recording should pick up. Most devices separate two sources. Internal audio is the sound coming from apps, videos, and system alerts, while microphone audio is a voice or anything else happening in the room. Some built-in tools capture both, some capture only one, and a few need extra setup. A screen recording can only include audio that was enabled before the capture began, so knowing where that setting lives on each device saves a lot of re-recording. The sections below cover iPhone, Android, Windows, Mac, and Chromebook, followed by a quick comparison and fixes for recordings that end up silent.

DateOctober 30, 2026 · Grace Mitchell

Turning On Sound in iPhone and iPad Screen Recording

Screen Recording is built into iOS and iPadOS, and one detail is often misunderstood: on iPhone, screen recordings capture in-app sound by default, and the microphone toggle only adds your voice. That means a video, game, or voice message playing on screen is recorded with its sound even when the microphone is off, as long as the app allows it.

  1. Open Control Center by swiping down from the top-right corner of the screen, or up from the bottom edge on iPhones with a Home button.

  2. Press and hold the Screen Recording button until the extra options appear.

  3. Tap Microphone to turn it on if the recording should include a voiceover, or leave it off to capture app sound only.

  4. Tap Start Recording and wait for the three-second countdown to finish.

  5. To stop, tap the red indicator at the top of the screen, or open Control Center and tap the Screen Recording button again.

Finished recordings save to the Photos app, where they can be trimmed before sharing. If the Screen Recording button is missing, it needs to be added once. On iOS 18 and later, this happens inside Control Center itself: touch and hold an empty area, tap Add a Control, then choose Screen Recording. Earlier versions handle it under Settings, then Control Center. Some apps, particularly those playing protected video or handling calls, block their audio from being captured, which explains why a recording can come out silent even when every setting looks correct.

Choosing an Audio Source in Android's Screen Recorder

Most Android phones include a screen recorder in Quick Settings. The tile is usually called Screen record or Screen recorder depending on the brand, but the audio choice works in a very similar way across devices.

  1. Swipe down twice from the top of the screen to open the full Quick Settings panel.

  2. Tap the Screen record tile. If it is not there, tap the edit or pencil icon and drag it into the panel.

  3. Turn on audio recording and choose a source: device audio, microphone, or both together.

  4. Tap Start, then tap the recording notification or the same tile to stop.

Device audio is the right choice for capturing a game, a video, or a voice message without picking up background noise, while microphone mode suits tutorials that are narrated live. Combining both works well for reaction videos or walkthroughs where on-screen sound and commentary need to be heard together. Recent Android versions also let the recorder capture a single app instead of the entire screen, which keeps incoming notifications out of the final video. Finished files usually appear in Photos or Gallery, often in a Screen Recordings or Movies folder.

Snipping Tool or Xbox Game Bar on Windows

Windows 11 handles full screen recording through the Snipping Tool. Pressing Windows key + Shift + R opens it directly in recording mode, or it can be launched from the Start menu by switching to the video camera icon and selecting New. After dragging to select the area to record, the toolbar shows separate toggles for the microphone and system audio, and both can be turned on together before clicking Start. In recent versions, recordings save automatically to a Screen Recordings folder inside Videos, and the preview window that opens at the end allows a copy to be saved anywhere else.

The Xbox Game Bar is available on both Windows 11 and Windows 10, and it remains the main built-in option on Windows 10. Pressing Windows key + G opens the overlay, where the Capture widget has a microphone toggle next to the record button, while Windows key + Alt + R starts recording without opening the overlay at all. Game Bar records the active app's sound by default, and its capture settings include an option to record all system audio instead. Its main limitation is that it records one app window at a time, so it cannot capture the desktop or File Explorer, and switching to another window during the recording leaves that window out. Captures save to the Captures folder inside Videos.

Snipping Tool is the better choice for recording a full desktop on Windows 11, while Xbox Game Bar is built for capturing a single app or game.

Why Macs Need Extra Setup for Internal Audio

On a Mac, pressing Command + Shift + 5 opens the screenshot toolbar, which also records video. Clicking Options reveals a Microphone section where the built-in mic or a connected external microphone can be selected, and choosing Record Entire Screen or Record Selected Portion starts the capture. To stop, click the stop button in the menu bar or press Command + Control + Esc. By default, the finished file saves to the desktop, and it can be trimmed by opening it in QuickTime Player.

What the toolbar cannot do is record internal audio. macOS does not send sound from apps, browsers, or videos into its built-in screen recorder, so a recording made with no microphone selected comes out silent, and one made with the microphone only picks up system sound faintly through the speakers. Capturing clean internal audio requires a virtual audio driver that routes system output to an input the recorder can select, or a dedicated recording app that handles the routing itself. This gap is one of the most common reasons Mac screen recordings sound different from what was expected.

Recording With the Chromebook Screen Capture Tool

Chromebooks include a screen capture tool directly in the system tray, separate from any browser extension. Opening Quick Settings from the bottom-right corner and selecting Screen capture, or pressing Ctrl + Shift + Show windows, brings up the capture bar. After switching from screenshot to screen record and choosing full screen, a single window, or a partial area, the settings gear in the capture bar holds the audio options, including the microphone toggle, which needs to be turned on before recording starts. Clicking Record begins the capture, and the stop button in the shelf ends it. Recordings save to the Downloads folder by default and can be opened in the Gallery app right after they finish.

Which Audio Gets Captured on Each Device?

Device Built-in tool Shortcut Audio it can capture Default save location
iPhone and iPad Screen Recording in Control Center None App audio by default, microphone optional Photos
Android Screen record in Quick Settings None Device audio, microphone, or both Photos or Gallery
Windows 11 Snipping Tool Windows + Shift + R Microphone and system audio Videos, Screen Recordings
Windows 10 and 11 Xbox Game Bar Windows + Alt + R Active app audio, microphone optional Videos, Captures
Mac Screenshot toolbar Command + Shift + 5 Microphone only Desktop
Chromebook Screen capture Ctrl + Shift + Show windows Microphone Downloads

Fixing a Screen Recording With No Sound

Silent recordings almost always trace back to a setting that was off when the capture started. The microphone toggle on iPhone, the audio source on Android, the system audio switch in Snipping Tool, and the microphone selection on a Mac all need to be set before pressing record, because audio that was not enabled at the start of a recording cannot be recovered afterward. When the settings look right and the sound is still missing, the app being recorded is the next suspect, since streaming services and calling apps often block audio capture on purpose. Testing the same setup with a different app quickly shows whether the problem is the device or the content.

Clear audio matters as much as having audio at all. A headset with a built-in microphone usually sounds better than a laptop's internal mic, which also picks up fan noise and keyboard clicks. Recording a 5-to-10-second test clip first makes it easy to check levels before the real take. Closing apps that play sounds or send notification chimes keeps unwanted noise out, since system audio settings capture everything playing on the device. Keeping the volume at a moderate level rather than at maximum prevents distortion on playback, and a quiet room or an external directional microphone makes a noticeable difference for recordings that rely heavily on voiceover.

Turning What You Recorded Into Something You Can Listen To

Many screen recordings exist so the content can be revisited later: a recorded lecture, a webinar walkthrough, or a training session where slides or a document filled the screen. Scrubbing back through a long video to find one explanation is slow, especially when the underlying material already exists as text. Listen AI turns that source material, whether it is a PDF of the slides, an article, or a set of notes, into natural-sounding audio, so it can be reviewed during a commute or between classes without reopening the video. Choosing a voice, following along with highlighted text, and adjusting playback up to 4.5x make it easy to return to just the part that matters.

Stop Rewatching, Start Listening
FAQ

Frequently Asked Questions

Can I record my iPhone screen with audio?

Yes. iPhone screen recordings capture app sound by default. To add your own voice, open Control Center, press and hold the Screen Recording button, tap Microphone, then tap Start Recording. The finished video saves to the Photos app.

Why is my iPhone screen recording not picking up sound?

The most common causes are an app that blocks audio capture, muted media volume, or, for voiceovers, a microphone that was left off. Check the Microphone option in the long-press menu, raise the volume, and try recording a different app to see whether the issue is app-specific.

How do I turn on screen recording on my iPhone?

On iOS 18 and later, open Control Center, touch and hold an empty area, tap Add a Control, and select Screen Recording. On earlier versions, go to Settings, then Control Center, and add Screen Recording from the list.

Can I record my Android screen with sound?

Yes. Open the full Quick Settings panel, tap Screen record, turn on audio, and choose device audio, microphone, or both before tapping Start. Tile names and menu wording can differ slightly by phone brand.

How do I enable audio in a Windows screen recording?

In Windows 11's Snipping Tool, turn on the microphone and system audio toggles in the recording toolbar before clicking Start. In Xbox Game Bar, use the microphone toggle in the Capture widget, and change the capture settings if all system audio should be included.

What is the shortcut key for screen recording in Windows 11?

Windows key + Shift + R opens the Snipping Tool in recording mode. Windows key + Alt + R starts an Xbox Game Bar recording of the active app instantly.

How do I record my screen with sound on a Mac?

Press Command + Shift + 5, click Options, and choose a microphone under the Microphone section, then click Record Entire Screen or Record Selected Portion. The built-in tool records microphone audio only, so capturing internal sound requires a virtual audio driver or a dedicated recording app.

How do I screen record with audio on a Chromebook?

Open Quick Settings, select Screen capture, switch to screen record, and turn on the microphone in the capture bar's settings before recording. The finished file saves to the Downloads folder automatically.

Can I add audio to a screen recording after it is finished?

Sound that was not captured during the recording cannot be recovered. A new audio track, such as a voiceover or background music, can still be added afterward in most video editing apps.

Can I record internal audio without using the microphone?

Yes, on most devices. iPhone records app sound by default, Android offers a device audio option, and Windows can capture system audio through Snipping Tool or Xbox Game Bar. Macs are the exception and need extra setup to record internal sound.

Listen AI

AI Text to Speech Reader

Listen AI converts written content into natural sounding audio, letting students, professionals, and everyday readers absorb information without staring at a screen. Through AI voices, adjustable playback speed, and support for PDFs, articles, and documents, listening replaces reading wherever it fits better into the day. To turn any written content into audio, you can start with text to speech today, or learn how to listen to PDFs and documents on the go.

Helps readers complete complex documents up to 2.5x faster while improving comprehension by 34%.
Mobile Apps

Download Our Apps

Listen to PDFs, articles, and docs in natural AI voices

Scan QR code to download on iOS or Android

App StoreGoogle Play